Refurbish Your Cracked iPhones with LCD Refurbishing Machines General Setting

In this blog, you are going to know the steps and the equipment required to refurbish your cracked iPhones and about the LCD Laminating Machine.

Tools and steps which you need to succeed

1. Cut the 4 corners of the frame- using the hot flame blade cutter, cut all the plastic bezel on all 4 corners. This will allow the side of the frame to be easily pulled off for the subsequent process.

2. Remove the frame from the glass- try to have 2 in 1 LCD Refurbishing Machines, which is a great cost and space saver. A hot plate should be used to heat the glue so that the side frames can be easily removed from the glass. The hot plate must be kept at 70 degrees Celsius. 

3. Separate the glass from the LCD using a Screen separator machine- a small piece of tape packing tape must be placed over the cracked LCD so that it allows for better suction on the hot plate. Make sure that the LCD separator machine is maintained at 70 degrees Celsius. Using the small razor blade or knife, remove the leftover glue by using the cutting wire start cutting off the LCD starting at the bottom.

4. Remove the polarizer from the LCD using the Polarizer Remover Machine- in this step, use the built-in hot blade and set it to a temperature of about 180 to 200c. After the blade is fully heated, start with one edge of the LCD removing the entire polarizer and work continuously until the polarizer is completely separated enough to be pulled back so that it’s become easy to remove the remainder of the polarizer.  

All the above steps must be done in the correct sequence order for getting an effective result. Parts Fixit is the leader in LCD Refurbishing Machine innovation, and they also have Back Glass with Apple Logo, which can be used to fit onto the back glass panel during the lamination of the iPhone.

7 Must-Have New Tools for Mobile Repairing Essential for Mobile Repairing

Selecting mobile phone tools is a very crucial step in mobile repairing. Hundreds of mobile repairing tools, tool kits, and pieces of equipment are available for mobile repairing. 

Some of these mobile tools are cheap, while others are expensive.

So, how to select the best and must-have All Spare Parts for Mobile Phones? In this blog, you will know about all the new tools that are essential for mobile repairing. 

Checklist of all the New Tools for Mobile Repairing -

1. Soldering iron- is the 1st must-have tool for mobile repairing. Experienced professionals usually buy a temperature-controlled soldering iron that contains everything in an easy-to-carry kit or carry bag. This kit helps you to keep everything in an organized manner. 

2. Hot air blower- for mobile repairing, especially for iPhone Back Glass Repair, you must have a good quality hot air blower or SMD Rework station. Temperature controlled good quality professional technicians use SMD Rework station. 

3. Precision screwdriver- good quality precision screwdriver and mobile phone opening tools are the must-have tools for any mobile repairer. T4, T5, T6 are the best quality precision screwdriver that can unscrew and disassemble mobile and smartphones of any brand and any model.

4. Digital Millimeter- it’s the most tool for every mobile repair technician. It costs a little more, but both the beginner and the expert technician must have this tool.

5. Magnifying lamp- good quality magnifier with PCB holder is a must for every mobile repair technician. 

6. ESD Protection tools- most of the ICS on the mobile phone PCB and SMD components are ESD sensitive and get damaged before you know. So, an ESD protection tool is a must.

7. Soldering consumables- for soldering and de-soldering of any electrical component, a repairing technician must have certain soldering consumables like solder paste, paste flux, solder wire, liquid flux, paste flux, desoldering wick, and jumper wire.